« back | «» home

Vacuum Investment Mixer - MIXVEST

This machine was developed for agility, comfort and security.

Provides vacuum at the mix process during inclusion and at the flask tray.

Maximum capacity of 6 flasks of 3 “, 5 flasks of 3 “ ½ or 4 flasks of 4 “ of diameter.

Built in acrylic for better visualization of the process.

Digital speed control of the mixture.

Vibration system.

Digital Timer.

Automatic inversion of mixer’s rotation.

Self-washing System.

Protection filter of the vacuum pump.

MIXVEST
Width 900 mm
Depth 450 mm
High 2000 mm
Weight (approx.) 50 Kg
Voltage 220 V
Amperage 6 A
Power 1320 W
Wood Packing
Width 1000 mm
Depth 600 mm
High 2100 mm
Gross Weight (approx.) 150 kg



Functioning

   
Put the flasks to be coated in the Vacuum Investment Mixer.
Assembly the machine.
   
Put one spoon of investment
Put the water, and then put the rest of investment in the Vacuum Investment Mixer obeying the ratio of water X investment.
   
Mix in the superior vacuum compartment for a period of 4 the 6 minutes.
   
Be sure that the mixture is homogeneous. Use the speed controller to leave the mixture homogeneous and do not leave the temperature exceeds 22ºC.
   
Switch on the vibrator and put the mixture in the flask under the inferior vacuum chamber.
   
After 4 or 6 minutes of mixing, fill in each flask using the two manual commands. One liberates the mixture and the other turns the plate.
   
Put the investment in the corner of the flask, preventing eventual damages at wax tree.

Fill in the flasks in up to 2 minutes.
   
Wait the ending of the total time in the low compartment that must be about 4 minutes.

While doing it, clean the mixture compartment.
   
Liberate the valves of vacuum to disassemble and to clean the equipment.
   
Leave the flasks in rest for at the very least 1-hour.
 


Presentation Movie
 
MIXVEST.avi - 1400kb
 


Restricted area